Nortel Networks 1000M User Manual
Page 89
Expansion cabinet as a power shelf for auxiliary processors
89
Refer to
"Installing the power supplies for the Cabinet system" (page
CAUTION
CAUTION WITH ESDS DEVICES
A grounded wrist strap, provided with the cabinet, must
be worn when handling circuit cards to prevent damage
caused by static electricity.
Make sure that the NTDK70 AC or NTDK72 DC power supplies are
installed and that their circuit breakers are set to OFF.
5
Refer to the ACD Max documentation to complete the installation of
the Max units and related cables.
Connectors for the cables in the expansion cabinet are located
on the panel below the cabinet’s shelf. Refer to
connecting cross-connect terminals" (page 213)
for information
about connection cables to the cabinet.
Note: The slots in the expansion cabinet are labeled 11 through
20. The corresponding connectors for cables are labeled J11
through J20 or J1 through J10, depending on the type of cabinet.
—End—
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.