Nortel Networks 1000M - Manual (Page 256)

256 Installing and connecting SDI and Ethernet network interfaces
Figure 124
Ethernet connection
Procedure 47
Connecting the Ethernet cable to the Chassis system
Step Action
1 Insert an industry-standard Media Access Unit (MAU) into the
Ethernet connection at the bottom left-hand corner of the chassis.
Note: The Chassis system does not include the MAU.
2 Insert the Ethernet cable into the MAU. See Figure 125 "Ethernet
cable inserted into an industry-standard MAU" (page 257) .
Note: When the time comes to configure the Ethernet link, use
LD 117.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.