Nortel Networks 1000M - Manual (Page 289)

Installing software in a new system 289
IP PEER H.323 TRUNKS : 0 0
SIP Access Ports : 0 0
M3900 Language Set : 1.Global 10 languages
Is this correct? (y/n/[a]bort):
y <CR> (yes)
n <CR> (no)
a <CR> (abort, return to main menu)
If the response was NO, go to step 8 .
If the response was YES, go to step 22 .
22 Indicate if you wish to enable Automatic Centralized Software
Upgrade.
Enable Automatic Centralized Software Upgrade?
(y/n/[a]bort):
23 Enter the keycodes from the Keycode Data Sheet.
Enter new Keycodes:
Key 1:
Key 2:
Key 3:
xxxxxxxx <CR>
yyyyyyyy <CR>
zzzzzzzz <CR>
After you enter the last keycode, the system validates the keycodes
and displays a message indicating whether or not the validation
succeeded. Follow the instructions given below.
Keycode validation successful.
***WARNING*** A system restart will be invoked as part
of the software installation process.
If the successful message appears, go to step 24 .
If the unsuccessful message appears, repeat this step ( step 22 ).
After three unsuccessful keycode validation attempts, the following
message appears:
Keycode validation unsuccessful.
Installation aborted...returning to main menu.
24 Complete the software installation.
Are you sure you wish to perform the installation?
(y/n/[a]bort):
y <CR> (yes)
n <CR> (no)
a <CR> (abort, return to main menu)
If the response was NO, go to step 5 .
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.