Nortel Networks 1000M - Manual (Page 327)

Connecting telephones without a PFTU 327
Figure 137
Meridian Digital Telephone cross-connections
Connecting telephones without a PFTU
Procedure 62
Connecting telephones without a PFTU
Step Action
1 Locate the telephone terminations on the cross-connect terminal.
2 Connect one end of the cross-connect wire to the leads of the
telephone.
3 Locate the line card terminations on the cross-connect terminal.
For the Cabinet system, refer to Table 45 "Terminal number
assignments: Main and Expansion Cabinets 1 and 2" (page 332) and
Table 46 "Terminal number assignments: Expansion Cabinets 3
and 4" (page 333)
.
For the Chassis system, refer to Table 47 "Terminal Number
assignments: Chassis and chassis expander" (page 334) .
4 Connect the other end of the cross-connect wire to the assigned
TN terminal block.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.