Nortel Networks 1000M - Manual (Page 388)

388 Preprogrammed data
Trunk routes
Table 93 "Preprogrammed trunk route information" (page 388) shows
preprogrammed trunk route information that you need on hand to activate
and modify trunks.
Table 93
Preprogrammed trunk route information
Route Type Access Code Mode Interface
00 * COT 7100 IAO –
01 * COT 7101 ICT –
02 * COT 7102 OGT –
03 TIE 7103 IAO -
04 TIE 7104 ICT –
05 TIE 7105 OGT –
06 DID 7106 ICT –
07 WAT 7107 IAO –
08 WAT 7108 ICT –
09 WAT 7109 OGT –
40 MUS 7140 OGT –
41 AWR 7141 – AUD
42 RAN 7142 – DGT
43 RAN 7143 – AUD
44 PAG 7144 OGT –
50 FEX 7150 IAO –
51 FEX 7151 ICT –
52 FEX 7152 OGT –
Note: Trunk routes marked with an asterisk (*) are configured support
Call Detail Recording (CDR) output. The CDR is preconfigured as
follows:
CDR YES
INC YES
OAL YES
AIA YES
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.