Nortel Networks 1000M - Manual (Page 458)

458 Central Answering Position
If the customer associated with Party A has Forward Key Allowed Class of
Service (FKA), then depressing the BFS key by party B will result in one
of the following:
• Party A has already been forwarded to a station other than station B,
then party A remains forwarded to that station.
• Party A’s calls are not forwarded, then party A’s calls are forwarded to
party B and the CFW lamp on party A’s set lights up.
• Party A’s calls were forwarded to party B, then party A’s call forward
is canceled.
Note: If party B presses the BFS key while receiving dial tone or
special dial tone, the BFS key then works as an Auto Dial key to
party A.
If a call originates to party A, a CAP set with the BFS key depressed, the
call will automatically transfer to the designated Call Forward/Busy number,
party B. If party B is in Call Forward state, the call will ring three times,
then immediately transfer to party C.
In contrast, if a call originates to party A, a CAP set without the BFS key
depressed, the call will automatically transfer to party C.
Feature requirements
Party B must have a Meridian Digital Telephone. Party A may have a
Meridian Digital Telephone or an analog (500/2500-type) set, with Call
Forward All Calls equipped.
A station may be monitored by a maximum of 16 other stations, using the
BFS key.
The same feature requirements apply as for Call Forward All Calls.
Feature interactions
None.
Feature programming
To activate this feature, use the following task list in LD 11 and LD 15.
LD 11: Configuring a BFS key
Prompt Response Description
REQ: CHG Modify existing data.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.