Nortel Networks 1000M User Manual
Page 279
Installing software in a new system
279
documentation references the issue and date of the DepLists provided with
the software. Refer to the Enterprise Solution PEP Library for the latest
issue of DepLists for the software release.
If the software delivery medium (preprogrammed daughterboard or PC
Card) does not contain the latest issue of the DepLists, download the latest
DepList zip file from the Enterprise Solution PEP Library onto a PC Card.
After completing the Software Installation Program (see
"Installing software" (page 280)
), use the Matrix DepList and PEPs (MDP)
commands to install the Dependency Lists from the zip file.
Refer to the Product Matrix Dependency List User Guide, available on the
Enterprise Solution PEP Library, for more information about accessing and
using DepLists.
Summary of steps
The following list summarizes the software installation steps:
1. Get MAC address from IP daughterboard (if applicable).
2. Power up/install IP Expansion Cabinets or Chassis.
3. Power up Main Cabinet or Chassis. Ensure Link LED is green.
4. Perform software installation on the Main Cabinet or Chassis:
a. Set the system time and date.
b. Select the New System Installation menu.
c. Identify if the system is a CS 1000M and has a Signaling Server.
d. Select service level.
e. Select whether or not to install DepLists as part of the software
installation.
f.
Select packages.
g. Select a database.
h. Select License parameters. Ensure that the Survivability parameter
is configured correctly.
i.
Select M3900 Language Set.
j.
Validate keycodes.
k. Configure MAC address of the IP Expansion Cabinet or Chassis
(if applicable).
5. Reboot the Main Cabinet or Chassis.
6. Wait for link to come up.
7. Perform software installation on IP Expansion Cabinets or Chassis.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.