Nortel Networks 1000M - Manual (Page 21)

Signaling Server (for CS 1000M systems) 21
Figure 2
Cable connections
Cooling
The NTAK11 cabinet is designed to permit natural convection cooling. For
more information on requirements, refer to
"Installing the Cabinet system"
(page 75) .
WARNING
Do not block cabinet ventilation. Poor ventilation could cause the
system to overheat and damage system components, which may
result in service interruption.
Signaling Server (for CS 1000M systems)
The Signaling Server is an industry-standard, PC-based server. It provides
a central processor to drive the signaling for IP Phones and IP Peer
Networking.
The Signaling Server can be installed in a load-sharing redundant
configuration for higher scalability and reliability.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.