Nortel Networks 1000M - Manual (Page 173)

Installing the NTDK20 SSC card on the Main Cabinet or Chassis 173
5 Insert the plug in its designated connector on the daughterboard.
Once inserted, lock the connector in place by turning it a half turn
clockwise. Refer to
Figure 80 "Glass fiber-optic cable connection on
dual-port daughterboard" (page 173) .
6 Repeat the steps above for the remaining connector and plug.
7 Route the fiber cables through the SSC cable router on the SSC
card. Refer to
Figure 80 "Glass fiber-optic cable connection on
dual-port daughterboard" (page 173) for location of the cable router.
8 Insert the SSC card into slot 0 of the Main Cabinet or Chassis. Lock
card into faceplate latches.
9 Route the cables through the SSC Cable Routing Guide under the
main cabinet as shown in
Figure 81 "Cable Routing Guide under
main cabinet" (page 174) .
—End—
Figure 80
Glass fiber-optic cable connection on dual-port daughterboard
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.