Nortel Networks 1000M - Manual (Page 323)

323
Connecting the telephones
Contents
This section contains information on the following topics:
"Introduction" (page 323)
"Cable assignments for the Cabinet system" (page 324)
"Cross-connecting telephones" (page 325)
Procedure 62 "Connecting telephones without a PFTU" (page 327)
"Connecting analog 500/2500-type telephones with a PFTU" (page 328)
"Connecting off-premise telephones" (page 329)
"Connecting an attendant console" (page 331)
"Cross-connecting terminal Digital Subscriber Loops" (page 336)
"Activating telephones" (page 336)
"Activating a default model with a character display" (page 338)
"Activating a default model without a character display" (page 339)
"Activating a customized model with a character display" (page 340)
"Activating a customized model without a character display" (page 342)
"Activating terminals on a DSL" (page 343)
Introduction
This chapter contains instructions for connecting telephones to the
cross-connect terminal. It also contains the location of the individual
extension numbers (DNs) when you are implementing one of the default
numbering plans and instructions on how to activate each telephone.
This chapter contains the following procedures:
• Procedure 61 "Cross-connecting telephones" (page 325)
• Procedure 62 "Connecting telephones without a PFTU" (page 327)
• Procedure 63 "Connecting 500/2500-type telephones with a PFTU"
(page 328)
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.