Nortel Networks 1000M - Manual (Page 271)

Upgrading software and firmware 271
2. Transmit node properties.
3. Configure the Follower cards.
Upgrading software and firmware
Before upgrading your VGMC software and IP Phone set firmware, check
which version of card software and IP Phone set firmware is currently
installed. Compare this information to the latest versions available.
To do this, access the Nortel Software Downloads web site. Refer to
IP Line Fundamentals (NN43001-500) and Telephones and Consoles
Fundamentals (NN43001-567) for additional information.
If you must upgrade the software, the preferred method of software delivery
is directly from the ESD website. When Internet access is restricted or
unavailable from the OTM PC, order the latest software on CD-ROM, and
insert the CD-ROM into the CD-ROM drive on the OTM PC.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.