Nortel Networks 1000M - Manual (Page 325)

Cross-connecting telephones 325
Cross-connecting telephones
Connect the telephones according to the following figures:
Cross-connections for Analog (500/2500-type) telephones are shown
in
Figure 136 "NE-500/2500-type telephone cross-connections" (page
326) , and for Meridian Digital Telephones in Figure 137 "Meridian Digital
Telephone cross-connections" (page 327) .
Procedure 61
Cross-connecting telephones
Step Action
1 Locate the telephone terminations at the cross-connect terminal.
2 Connect the Z-type cross-connect wire to the leads of the telephone.
3 Locate line circuit card (TN) terminations at the cross-connect
terminal.
4 Connect the other end of the cross-connect wire to the assigned
TN terminal block.
—End—
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.