Nortel Networks 1000M - Manual (Page 225)

Connecting the cables 225
Table 29
AUX cable terminations for the Cabinet system
Color Wire number Designation Connection
W-BL 1 BRTN to QUA6-J1 1R
BL-W 2 BRTN to QUA6-J1 2R
O-W 3 -48V AUX (250mA) to QUA6-J1 25T, 25R
W-O 4 PFTS to QUA6-J1 2T
G-W 5 -15V AUX Console power*
W-G 6 +15V AUX Console power*
*Each AUX cable can provide power for only one console.
—End—
Procedure 41
Connecting the cables for the Chassis system
Step Action
1 Loosen the Velcro straps at each connector you plan to use.
2 Connect a 25-pair cable to each of the connectors that will contain a
line or trunk card. Refer to the card slot assignment plan.
Make sure you tag both ends of each cable with the chassis and
connector numbers. See
Figure 106 "Cable connectors in a system
cabinet" (page 224) .
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.