Nortel Networks 1000M User Manual
Page 147
147
Installing and connecting reserve
power supplies for the Cabinet system
Contents
This section contains information on the following topics:
"Types of reserve power" (page 147)
"NTAK75 battery unit installation" (page 148)
"NTAK76 battery unit installation" (page 151)
"Connecting other battery backup systems" (page 155)
Introduction
This chapter describes how to install and connect a reserve DC power
supply to Cabinet systems.
If installing a multiple-cabinet system, each cabinet must have its own
reserve power supply.
Types of reserve power
The types of reserve battery power are:
•
The NTAK75 battery box, which has the following features:
— designed to be float-charged by the NTDK70 AC power supply
— provides a minimum of 2 hours of reserve DC power
— mounts to the floor
— supports one system cabinet
•
The NTAK76 battery box, which has the following features:
— designed to be float-charged by the NTDK70 AC power supply
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.