Nortel Networks 1000M - Manual (Page 276)

276 Installing software
The system limits the validation of keycodes to three consecutive attempts.
After the third unsuccessful attempt, the Software Installation Program
returns to the main menu. Any data entered during this session is lost.
Service levels (Feature sets) and License parameters
The Software Installation Program allows the selection of service levels to
be installed and enabled on the Small System. Service levels, such as
Enhanced Business or Networking Services, have an associated list of
software packages and License parameters. The Software Delivery card
(PC Card) can include several preconfigured service levels.
The Software Installation Program also allows the addition of individual
packages from the service level and the changing of system License
parameters.
Additions and changes are keycode controlled; therefore, the packages and
License parameters must match those corresponding to the site’s keycodes.
Note: The Software Installation Program does not check the
prerequisites and interactions of added packages.
Security device
A security device comes with each new Small System. Attach this device to
the component side of the NTDK20 Small System Controller (SSC) card
at the time of initial installation. The security device remains there for the
life of the system.
AUX ID
Enter the AUX ID using the Software Installation Program. For new Small
System sites, the AUX ID is the system security ID. When assigned, the
AUX ID remains for the life of the system.
Customer database
The Software Installation Program allows the installation of a customer
database from one of the following sources:
Pre-Configured database
The PC Card can include several preconfigured databases and their
associated service levels. In addition, a minimal database is provided which
contains basic system configuration information with no customer data.
Note: When prompted during the Software Installation Program,
if you select any response other than "Pre-Configured database,"
preprogrammed data will not be loaded on the system. Preprogrammed
data cannot be removed from the Small System with one command once
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.