Nortel Networks 1000M - Manual (Page 121)

Wall mounting in a horizontal position 121
5 Place the chassis on the shelf brackets. Carefully slide the chassis
on the wall shelf brackets until it touches the chassis stops on the
brackets. See
Figure 52 "Chassis stops on the wall shelf brackets"
(page 121) .
Figure 52
Chassis stops on the wall shelf brackets
6 Fasten the chassis in position using the four thumb screws, located
on the bottom side of the shelf brackets.
7 Tighten the eight #12 wood screws into the plywood backboard.
Make sure that the shelf brackets and chassis are fastened securely
in position. See
Figure 53 "Chassis installed on a wall in a horizontal
position" (page 121) .
Figure 53
Chassis installed on a wall in a horizontal position
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.