Nortel Networks 1000M - Manual (Page 172)

172 Installing fiber expansion
Figure 79
Fiber-optic cable connection
Procedure 24
Installing glass fiber-optic cable
Step Action
1 Put on the antistatic wrist strap.
2 Place the SSC card on a clean, flat, ESD-dissipated surface.
3 Remove the protective plugs from one connector on the Fiber
Daughterboard.
4 Remove the protective cap from the corresponding plug (Tx or Rx)
on the glass fiber-optic cable.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.