Install burette, Titra lab – Hach-Lange TITRALAB 840_845 Reference Manual User Manual
Page 107
Advertising
Titra
Lab
®
TitraLab 840 and 845 Reference Manual
Page 107
Install burette
The burette must be installed before installing a reagent.
Proceed as follows:
If required, use the burette functions to replace or remove the
installed burette.
Press 3.
For address,
select the position of the
burette being installed
(TIM845 only).
Press 4.
Enter burette volume and
serial number. Press 1.
Install the burette on the
Titration Manager at the
address indicated,
.
Advertising