Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 22)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 22
7.
Enter the calibration parame-
ters.
8.
Press 1.
9.
Enter the electrode calibration
parameters. Press Esc then 2.
10.
Select the buffer solutions
used. Press Esc then 3.
11.
Enter the results parameters.
Press Esc then 4.
12.
Enter the printouts parameters.
Press Esc twice. Electrode
programming is completed.