Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 160)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 160
Results menu This menu displays the result identification parameters required to run
a sample method, an electrode or a reagent calibration.
To access:
• Method: Method library > Edit method > Results (key 3).
• Reagents: Reagents library > Edit reagent > Results (key 3).
• Electrodes: Electrode library > Edit electrode > Results (key 3).
The Results menu for a sample method with 1 result and 1 equation
Rinse time When a Sample Changer is in use enter the time (in minutes and
seconds) the electrodes should be immersed in each static rinse
beaker.
Refer to "Number of static rinses", page 127 .
Enter in:
Setup menu > Configuration (if Sample changer = SAC80 or
SAC850)
Range available:
00:00 to 30:59 min:s