Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 69)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 69
Delay after
addition Option available with TitraLab 845.
This delay is counted down after a reagent addition. This time allows
the solution to stabilise after a reagent addition and before the next
titration starts.
While an addition method is running, you can carry on
regardless this delay by pressing key Del.
Enter in:
Edit method > Parameters (titration method if Addition = Yes)
Edit reagent > Calibration parameters (if Addition = Yes)
Range available:
00:00 to 99:59 min:s
Delete electrode 1. Select the electrode to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu without deleting.
It is not possible to delete an electrode which is used in an-
other method or sequence. Modify the method or sequence,
e.g. change electrode ID or remove the electrode, before
deleting.
Delete method 1. Select the method to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu without deleting.
It is not possible to delete a method which is part of a
sequence or coupled method. Remove the method from the
sequence or from the coupled method before deleting.
Delete reagent 1. Select the reagent to be deleted.
2. Press 4.
3. Press
✓ to confirm or ESC to leave the menu without deleting.
It is not possible to delete a reagent which is used in another
method or sequence. Modify the method or sequence, e.g.
change reagent ID or remove the reagent, before deleting.