Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 25)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 25
Programming methods
Creating and editing a method
1.
Press 5.
2.
Press 1.
3.
Enter ID.
Press 1 to confirm.
4.
Enter method parameters.
Specify the Mode,
see "Mode",
page 122.
5.
Press 1.
6.
Press
✓ and select the
electrode(s) from the list(s).
Do not forget to select
the same electrode(s)
as the one(s) created in the
reagent calibration method.
Enter the other method
parameters. Press Esc then 2.