Change method name, Change reagent name, Change sequence name – Hach-Lange TITRALAB 840_845 Reference Manual User Manual
Page 58: Titra lab
Advertising
Titra
Lab
®
TitraLab 840 and 845 Reference Manual
Page 58
Change method
name
1.
Display the Main window.
2.
Press 5 then 2.
3.
In the ID field, enter the new name (16 characters maximum).
Change reagent
name
1.
Display the Reagent window.
2.
Press 5 then 2.
3.
In the ID field, enter the new name (20 characters maximum).
Change
sequence name
1.
Display the Main window.and select Sequence or SAC sequence.
If the SAC Sequence command is not available,
declare a Sample Changer (SAC80, SAC850) in the Setup >
Configuration menu (Supervisor access only).
Refer to "Sample changer", page 169
2.
Press 2 Sequence/Sample stack
3.
In the Sequence/Sample stack menu, select ID.
4.
Enter the new name (16 characters maximum).
Advertising