Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 189)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 189
Supervisor
mode In SUPERVISOR mode, you can create, select, edit, delete sequence
of methods electrodes and reagents.
To select the Supervisor mode, a supervisor code is required.
Proceed as follows:
• Press Stop for 3 seconds in the Main window.
• Enter the Supervisor code.
• Press 5 Exit
• Select Return in mode = Supervisor.
Refer to "User’s rights", page 194 .
Target titre Approximate value of the reagent titre.
Enter in:
Reagent window > New reagent
Format:
5 characters
Temperature
Probe/ Fixed at
25°C/Entered Probe
The sample or standard temperature can be measured using a
temperature sensor connected to the Temp socket of the Titration
Manager. Select a temperature sensor in the Method parameters
menu.
Fixed at 25°C
If measurements are to be performed at a constant temperature of
25°C.
Entered
If the temperature is to be entered manually.
Select in:
Edit method menu
Edit reagent menu if Titre = Calibrate
Edit electrode menu if Calibrate request = Yes