Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 78)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 78
Edit electrode
menu In this menu, you can rename the electrode (line ID), revise electrode
data, decide if you want to calibrate the electrode
(line Calibration request) and enter the electrode
calibration data if relevant.
To access:
1. Press 4 in the Electrode window.
2. Press 2 Edit electrode.
The following menus are accessible using the arrow keys:
Calibration parameters.
Refer to "Electrode calibration parameters", page 84 .
Calibration solutions.
Refer to "Solution menu", page 181 .
Results.
Refer to "Results menu", page 160 .
Printouts.
Refer to "Printouts menu", page 137 .