Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 36)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 36
Access routine
mode Press Stop for 3 seconds from the Main window then press 2.
These rules can be set by the Supervisor to allow the routine user
access to certain operations.
Enter in:
Setup menu > Access routine mode
Add method
menu Use this menu to set the ID and type of method to be added to a
sequence.
In the title bar, x/y (eg. 1/1) indicates the position "x" of the method in
the sequence and "y" the total number (1 to 3) of methods in the
sequence.
To access:
Press 1 in the Edit sequence menu.
Add. reagent =
Titrant The reagent used for addition is the same as the titrant used for the
titration.
Press
✓ and define an addition reagent different from the titrant in the
Parameters screen of the method.