Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 126)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 126
Number of
equations This is an extra result (0 or 1) to be calculated by the method. This
result is calculated using a user-programmed equation. This allows
you to calculate the result in units which are not available in the
instrument.
Enter in:
Edit method > Results
Number of IP Represents the number of inflection points (1 to 4) to be determined
during a titration run.
Enter in:
Edit method > Method parameters menu (for Monotonic IP, Dynamic
IP or Continuous IP method).
Number of
results Number of results (1 to 4) to be calculated with the units selected and
the raw results obtained. The raw results are the volumes determined
at each equivalent point.
Refer to "Appendix 3: Result calculations", page 205 .
For a back titration, the number of results is 1 and cannot be
changed.
Enter in:
Edit method > Results