Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 177)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 177
Sequence/
Sample stack
menu In this menu, you can edit a sequence and the sample stack
associated.
To access:
In the Main window, press 3 Sequence/Sample stack.
Refer to "Edit sequence menu", page 81 .
Refer to "Sample stack", page 174 .
Refer to "Skip empty position", page 179 .
Refer to "Sequence/SAC sequence", page 176 .
Sequence end
in Park (Yes/No) At the end of a sample changer sequence, you can dip the electrodes
into the Park beaker filled with a conditioning solution or you can left
the electrodes above the Park beaker (electrodes are stored dry in
this case).
Enter in:
Setup menu > Configuration (if Sample changer = SAC850)
Sequence ID Name of the sequence.
Enter in:
Sequence/Sample stack menu.
Refer to "Sequence/Sample stack menu", page 177 .
Range available:
Up to 16 alphanumeric characters.
Type of sequence (TIM or SAC)
Sequence ID (name)
Edit the sample stack
Reset the sample stack
Edit the sequence
Cannot be changed here.
Select to skip or not skip an empty position
of a SAC sequence