Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 159)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 159
Results factor
(Yes/No) This multiplying factor is applied to all Rn (n = 1 to 4) results of the
method. Equation result E1 is not processed.
Access:
Edit method > Results
Proceed as follows to multiply all your method results by a factor:
• In the method Results menu, select Results factor =
Yes.
• Run the method:
There is no results factor for a reagent calibration method.
Enter the results factor (from 0.001 to 10 000)
then press 1 to start the method.