Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 190)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 190
Temperature
sensor ID Name of the temperature sensor or name of the electrode with a built-
in temperature sensor.
Enter in:
Edit Electrode > Calibration parameters menu
Edit Method > Method parameters
Edit reagent > Reagent parameters
Range available:
16 characters
Test amount Sample quantity to be placed into the beaker.
Enter in:
Menu Beaker (Menu Sequence/Sample stack then press 1 Sample
stack).
Refer to "Sample stack", page 174 .
Range available:
0,001 to 100000 (unit = Sample Unit)
The sequence is
empty You are trying to run or complete a sample stack/sequence
experiment which contains no programmed methods.
Go to Sequence/Sample stack, Edit sequence screen and check the
sequence.