Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 70)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 70
Delete
sequence Deleting a sequence consists of removing all the methods present in
the sequence.
Refer to "Empty sequence", page 90 .
Demand:
Locked Electrode or Reagent calibration
The routine user is not allowed to bypass an electrode and/or reagent
calibration demand before continuing measurements. It means that
the electrode and/or reagent calibration periodicity has(have) been
elapsed.
Sequence edition
The routine user is not allowed to create, edit or delete sequence of
methods.
Enter in:
Setup menu > Access routine mode
Demand:
Unlocked Electrode or Reagent calibration
The routine user is allowed to bypass an electrode and/or reagent
calibration demand and continue measurements. This happens when
the electrode or the reagent calibration periodicity has elapsed.
Sequence edition
The routine user is allowed to create, edit or delete sequence of
methods.
Enter in:
Setup menu > Access routine mode
Derivative Specify if you want to print the derivative curve at the end of each test.
Enter in:
Printouts menu of Monotonic IP, Dynamic IP or Continuous IP method.