Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 99)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 99
Error messages If you have forgotten an operation while editing the method, icons
visible in the Electrode and Reagent windows indicate that an error(s)
has occured. To find out where the error has occured and to help you
solve them, run the “Check” command in the Main window. The
Titration Manager will automatically guide you through the operations
required to solve the errors encountered.
Refer to "Check command", page 59 .
Refer to "Electrode icons", page 87 .
Refer to "Reagent icons", page 149 .
List of Titration Manager error messages:
"No active electrode defined in "method ID"": see page 124.
"Add. reagent = Titrant": see page 36.
"Address conflict (between electrode IDs)": see page 38.
"Archives data lost - Cal. Data lost - Methods kept": see page 40.
"Back reagent = Titrant": see page 43.
"Back reagent unknown": see page 43.
"Blank not required": see page 53.
"Blank required": see page 53.
"Calibration delay elapsed": see page 55.
"Curves data lost - Cal. Data kept - Methods kept": see page 67.
"Electrode calibration not required": see page 84.
"Electrode not calibrated": see page 88.
"Electrodes are different": see page 90.
"Ground conflict": see page 104.
"Insufficient number of beakers": see page 109.
"Max. stab reached": see page 114.
"Max. vol - Predose > Bur. vol": see page 114.
"Max. volume reached": see page 115.
"Method wrong type": see page 118.
"Missing EP": see page 122.
"Missing IP": see page 122.
"Reagent calibration not required": see page 146.
"Reagent not calibrated": see page 150.
"Reagent titre not entered": see page 150.
"Reset memory": see page 156.
"Same buffer change buffer": see page 168.
"Sample unit conflict": see page 174.
"The sequence is empty": see page 190.
"Wrong buffer": see page 195.
List of SAC error messages:
"Communication failure (SAC error)": see page 60.
"ERR#32 (SAC error)": see page 98.
"Missing beaker (SAC error)": see page 122.
"SAC arm obstructed (SAC error)": see page 166.
"SAC option missing (SAC error)": see page 167.
"SAC switch Off/On (SAC error)": see page 167.
"Tray missing (SAC error)": see page 192.
"Turntable blocked (SAC error)": see page 193.
"Wrong type (SAC error)": see page 195.