Same buffer change buffer, Sample amount, Titra lab – Hach-Lange TITRALAB 840_845 Reference Manual User Manual
Page 168
Advertising
Titra
Lab
®
TitraLab 840 and 845 Reference Manual
Page 168
Same buffer
change buffer
This message appears at the start of an electrode calibration. The
same buffer has been programmed for 2 successive steps in the
calibration procedure.
Press
✓ and change one of the buffer values in the Solutions menu of
the electrode calibration method.
Sample amount
Enter the amount of sample used for the titration.
Enter in:
Edit method > Sample
Range available:
0.001 to 100000 (unit = Sample unit)
Advertising