Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 52)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 52
Beaker menu Use this menu to prepare a sample or calibration stack. This menu
defines individual data for all the samples or standards used in the
sequence.
Figure 9: Beaker menu (for a sample stack)
To access (for a sample stack):
1. Press 3 Sequence/Sample stack in the Main window.
A Sample Changer must be declared in the Configuration
menu.
Refer to "Sample changer", page 169 .
2. Press 1 Sample stack.
The sequence must have been edited in the Edit sequence
menu.
Refer to "Edit sequence menu", page 81 .
Refer to "Sample stack", page 174 .
To access (for a reagent calibration stack):
1. In the Reagent window, press 1 Calibrate/Enter titre.
2. Press 3 Calibration sequence.
A Sample Changer must be declared in the Configuration
menu.
Refer to "Sample changer", page 169 .
The reagent calibration method must have been edited
beforehand.
Refer to "Edit reagent menu", page 80 .
Refer to "Reagent calibration stack", page 148 .
To access (for an electrode calibration stack):
1. In the Electrode window, press 1 Calibrate electrodes.
2. Press 2 Calibration sequence.
A Sample Changer must be declared in the Configuration
menu.
Refer to "Sample changer", page 169 .
The electrode calibration method must have been edited
beforehand.
Refer to "Edit electrode menu", page 78 .
Refer to "Electrode calibration stack", page 85 .