Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 30)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 30
7.
Press 1 to add a method.
8.
Select the type of method.
9.
Select a method in the list of
available methods.
10.
Press 1 to add the method to
the sequence.
11.
If Sample has been selected in
step 8, enter the number of
samples (number of times you
wish to repeat the method in
the sequence).
If a SAC850 has been selected
in step 3, enter the sample
preparation number.
12.
Press 1 to add a second
method to the sequence.
Repeat steps 8 to 11.
3 methods can be chained in a
sequence.
After having added the last
method, press Esc twice.
Sequence programming is
completed.