Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 24)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 24
7.
Enter the calibration parameters.
8.
Press 1.
9.
Select the electrode used for
the calibration. This electrode
must be the one defined in
the method using this
reagent. Enter the calibration
parameters.
Press Esc then 2.
10.
Enter the parameters of the
standard used for the calibration.
Press Esc then 3.
11.
Enter the Results parame-
ters. Press Esc then 4.
12.
Enter the printouts
parameters. Press Esc twice.
Reagent programming is
completed.