Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 29)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 29
Programming sequences
A sequence (or SAC sequence) is a sequence of methods with automatic change of the beakers. A
sample changer (SAC80 or SAC850) is used.
1.
Press Stop for 3 seconds to
enter the SETUP menu.
2.
Press 1.
3.
Select a Sample Changer
(SAC80 or SAC850). Enter the
parameters of the sample
changer selected (number of
rinses, rinse time, etc.).
Press Esc then 5 (Exit) to quit
the Setup menu.
4
Press 3.
5.
Enter a name for the sequence.
6.
Press 3.