Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 150)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 150
Reagent
identification A reagent is identified with the following parameters entered in the
Edit Reagent menu:
• ID and Unit
• Titre
• Address
Reagent library To access, press 5 in the Reagent window.
The reagent library comprises the following menus and commands:
Reagent not
calibrated The reagent has not been calibrated and there is no reagent data
stored in the archives. Press
✓ and calibrate the reagent.
Reagent system A reagent system comprises all the reagents necessary to run a
method or a sequence of methods:
When a method/sequence is run, the instrument prompts you
to install or replace the reagents that will be required to run this
method/sequence.
Reagent titre
not entered The reagent titre of the active reagent has not been entered in the
Reagent library.
Press 1 in the Reagents window, press 1 Enter titre.
Reagent
library
New
reagent
Default
parameters
Delete
reagent
Edit reagent
Calibration parameters
Standard
Results
Commands/
actions
Programming
data
Printouts