Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 113)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 113
Language Select from English, French, German, Danish, Spanish, Italian or
Swedish.
Enter in:
Setup menu > Configuration
Low (result
indicator) Refer to "Result indicators", page 157 .
Main window First window to appear when the instrument is switched on:
To navigate in the window use:
• RIGHT and LEFT arrow keys, to move between the Method,
Reagent, Electrode and Cell windows
• UP and DOWN arrow keys allow you to select a line.
• Press
✓ to select an option (or use the corresponding numerical
key).
• Press ESC to leave the menus without applying changes.
Mains
frequency Specify the mains supply frequency (50 or 60 Hz). This selection will
optimise the signal/background noise ration for your measurements.
Enter in:
Setup menu > Configuration
Method
Reagent
Electrode
Cell
Title bar
Run method or sequence
Select sequence (available if a sample changer
Method library
GLP Archives
is declared in the Setup > Configuration menu).
Select method