Hach-Lange TITRALAB 840_845 Reference Manual - Manual (Page 179)

Titra Lab ® TitraLab 840 and 845 Reference Manual
Page 179
Skip empty
position Parameter of a SAC Sequence for sample beaker positions only. Does
not apply to electrode (or reagent) calibration beaker positions.
Does not apply if a SAC850 sample changer is used with the Beaker
detection option cleared (deselected),
see "Beaker detection", page 50 .
Selects whether you want or not the sample changer (SAC80 or
SAC850) to skip to the next beaker position if an empty position (*) is
found. If No is answered, 3 possibilities are offered if an empty posi-
tion is found: restart the analysis in the same beaker, skip to the next
beaker or end the analysis.
Enter in:
Press 2 Sequence/Sample stack from the Main window.
Refer to "Programming sequence", page 139 .
(*) Empty position:
An empty position means no beaker present at the position.
When you are using a SAC850, an empty position also means a beak-
er with less liquid than the minimum detection limit or a beaker with a
solid or a powder sample.
Refer to "Beaker detection minimum height", page 51 .