Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 11)

x
IM 04L31A01-17E
Names and Uses of Parts and Setup Procedures Using the Operation Keys
6. The operation varies depending on whether you wish to confirm or cancel the
changed settings (those setup item boxes that are yellow) as follows.
• When confirming the changes
Press the DISP/ENTER key. The settings that were changed are confirmed,
and the yellow setup boxes turn white. At the same time, the cursor moves
to the setup item at the upper left corner of the display (the first setup item on
the display). However, if the new settings violate the rules for the
corresponding items, the setup item box turns red.
The setup item boxes that
have been changed to an
invalid setting turn red.
• When canceling the changes
Press the ESC key. A confirmation dialog box appears.
Select [Yes] and press the DISP/ENTER key to cancel the setting changes
and return to the previous display.
Select [No] and press the DISP/ENTER key to abort the cancellation and
return to the display that you were working on.
7. To activate the settings that have been changed in the basic setting mode, the
settings must be saved. Press the [End] soft key on the basic setting menu.* A
confirmation dialog box appears.
To save the settings, select [Yes]. To not save the settings, select [No]. To return
to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER key.
* The basic setting menu is the menu that appears when the ESC key is pressed several
times after entering the basic setting items.