Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 91
3-11
IM 04L31A01-17E
Serial Interface
3
Procedure
For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page ix.
1.
Press the MENU key.
The setting mode (control) display appears.
2.
Press the FUNC key for approximately 3 s.
The basic setting menu appears.
3.
Press the [#7] (Communication) soft key ([#9] (Communication) soft key on the
CX1000).
The communication function setting menu appears.
4.
Press the [#1] (Ethernet, Serial) soft key ([#6] (Serial, Memory out) soft key on
the CX1000).
The Communication setting display appears.
CX2000 Communication (Ethernet, Serial) setting display
CX1000 Communication (Serial,
Memory out) setting display
Selecting the Baud Rate
5.
Use the arrow keys to move the cursor to the [Baud rate] box.
6.
Press one of the soft keys from [1200] to [38400] to select the baud rate.
Selecting the Data Length
7.
Use the arrow keys to move the cursor to the [Data length] box.
8.
Press the [7] or [8] soft key to select the data length.
3.5 Configuring the Serial Interface