Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 45)

2-15
IM 04L31A01-17E
Ethernet Interface
2
34. Press the [Input] soft key. An entry box appears.
35. Enter the file transfer destination directory in the entry box.
36. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The transfer destination directory that you entered appears in the [Initial path]
box.
Setting the Secondary FTP Connection
Set the secondary FTP connection only if you are using a secondary FTP server for
transferring files. If not, proceed to step 40.
37. Use the arrow keys to move the cursor to the [FTP connection] box.
38. Press the [Secondary] soft key.
39. Set the secondary FTP connection in a similar fashion as described in steps 11
to 36.
Confirming or Canceling the Settings
40. To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
41. Press the ESC key several times to display the basic setting menu.
42. Press the [End] soft key.
A dialog box appears for you to select whether to save the settings.
43. To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
2.5 Setting the FTP Client (Setting the Automatic Transfer of Display, Event, and Report Data Files)