Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 205)

7-13
IM 04L31A01-17E
7
Response
PTNO Pattern number in operation x1 (1 to 30)
SEGNO Segment number in operation x2 (1 to 99)
PRE_SEGNO Segment number used previously x3 (1 to 99)
SEGUSE Number of segments of the currently selected pattern x4 (1 to 99)
SEGTM Remaining segment time
hh Hour (00 to 99)
mi Minute (00 to 59)
ss Second (00 to 59)
WAITTM Wait time during wait action
hh Hour (00 to 99)
mi Minute (00 to 59)
ss Second (00 to 59)
RCYMOD Repeat setting of the pattern in operation x5
(0: OFF, 1: ON, 2: repeat infinite number of times)
ALL_RCY Repeat count of the pattern in operation x6 (0 to 999)
A valid value is indicated when RCYMOD is “1.”
REM_RCY Remaining repeat count of the pattern in operation x7 (0 to 999)
A valid value is indicated when RCYMOD is “1.”
RST Start segment number for repeat action x8 (1 to 99)
REN End segment number for repeat action x9 (1 to 99)
PTN_START_DATE/PTN_START_TIME
Program operation start date/time
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mi Minute (00 to 59)
ss Second (00 to 59), initial value is –1
PTN_START_DATE/PTN_START_TIME
Program operation stop date/time
yy Year (00 to 99)
mo Month (01 to 12)
dd Day (01 to 31)
hh Hour (00 to 23)
mi Minute (00 to 59)
ss Second (00 to 59), initial value is –1
_ Space
When a program pattern is not in execution, information about the last pattern that
was executed at the time of termination is output. In this case, the remaining segment
time (SEGTM) and the wait time of wait action (WAITTM) are zeroes.
7.2 Output Format of ASCII Data