Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 19)

1-2
IM 04L31A01-17E
1.2 Ethernet Communication Function
The CX comes with an Ethernet interface as standard. The interface can be used to
connect to a preexisting network (Internet or Intranet). By connecting to a network, you
can fully utilize the network function. Some of the functions include setting of the CX
from your PC, remote monitoring using the Web browser, alarm notification using e-mail,
and FTP transfer of data files.
To use this function, you must connect to a network and set the Ethernet interface
properly. For a description of the settings of the Ethernet interface, see chapter 2.
E-mail Transmission
This function automatically sends e-mail messages notifying you of alarms and errors.
E-mail messages containing the following information are sent to a specified e-mail
addresses. For recipients, you can set two groups containing registration of multiple e-
mail addresses. In addition, the information that is sent to each group can be different.
• When an alarm is activated/released
Notifies the alarm information.
• When recovering from a power failure
Notifies the time of the power failure and the time of recovery.
• When memory end is detected
Notifies the detection of memory end.
• When an media-related error occurs
Notifies the error code and message when an error is detected on the external
storage medium or when the data cannot be stored due to insufficient free space on
the external storage medium.
• When an error related to the FTP client occurs
Notifies the error code and message when data transfer fails using the FTP client
function.
• At the specified time
Notifies that the specified time has arrived. It is used to confirm that the e-mail
transmission operation including the network is working properly. You can specify the
reference time and the e-mail transmission interval for each recipient group.
• When a report is created (when the computation function option /M1 is specified)
Notifies the report results.