Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 50)

2-20
IM 04L31A01-17E
• Selecting whether to register (On/Off)
9.
Use the arrow keys to move the cursor to the [On/Off] box under Level.
10. Press the [On] or [Off] soft key.
If you selected [On] proceed to step 11; if you selected [Off] proceed to step 19.
• Setting the user name
11.
Use the arrow keys to move the cursor to the [User name] box.
12. Press the [Input] soft key. An entry box (numeric value input pop-up window)
appears.
13. Enter the user name in the entry box.
14. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The user name that you entered appears in the [User name] box.
• Set the password
15.
Use the arrow keys to move the cursor to the [Password] box.
16. Press the [Input] soft key. An entry box appears.
17. Enter the password in the entry box.
18. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The password that you entered is displayed in the [Password] box.
19. To register other users, repeat steps 7 to 18.
Setting the Application Time Out
• Enabling/Disabling communication timeout (On/Off)
20.
Use the arrow keys to move the cursor to the [On/Off] box under Application
time out.
21 Press the [On] or [Off] soft key.
If you selected [On] proceed to step 22; if you selected [Off] proceed to step 26.
2.7 Setting the Login and Timeout Functions of Ethernet Communications