Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 42
2-12
IM 04L31A01-17E
Procedure
For the basic flow of operation, see “Setup Procedure Using Operation Keys” on page
ix. For the procedure of entering characters and numbers, see the user’s manual
IM04L31A01-01E
or IM04L31A01-03E.
1.
Press the MENU key.
The setting mode (control) display appears.
2.
Press the FUNC key for approximately 3 s.
The basic setting menu appears.
3.
Press the [#7] (Communication) soft key ([#9] (Communication) soft key on the
CX1000).
The communication function setting menu appears.
4.
Press the [#2] (FTP client) soft key ([#3] (FTP transfer file) soft key on the
CX1000).
The communication setting display appears.
CX2000 Communication (FTP client) setting display
CX1000 Communication (FTP
transfer file) setting display
Selecting the Transferred Files
• Selecting whether to transfer the display/event data files (On/Off)
5.
Use the arrow keys to move the cursor to the [Disp&Event data] box.
6.
Press the [On] or [Off] soft key.
• Selecting whether to transfer the report data files (On/Off)
7.
Use the arrow keys to move the cursor to the [Report] box.
8.
Press the [On] or [Off] soft key.
On the CX1000, confirm the settings here.
To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
2.5 Setting the FTP Client (Setting the Automatic Transfer of Display, Event, and Report Data Files)