Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 38)

2-8
IM 04L31A01-17E
35. Enter the primary domain suffix in the entry box.
36. Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key.
The domain suffix that you entered is displayed in the [Primary] box.
• Setting the Secondary Domain Suffix
Set the information if a secondary domain suffix is present. If this is not necessary,
proceed to step 39.
37. Use the arrow keys to move the cursor (blue) to the [Secondary] box under
Domain suffix search order.
38. Set the address of the secondary domain suffix in a similar fashion as described
in steps 34 to 36.
Selecting the Communication Type Used to Output the Data in the Internal Memory
and Files on the External Storage Medium
On models without the serial communication function, the [Memory out] item does not
appear, because the item does not need be specified.
39.
Use the arrow keys to move the cursor to the [Memory out] box.
40. Press the [Ethernet] or [Serial] soft key.
To use the Ethernet interface, press the [Ethernet] soft key.
Confirming or Canceling the Settings
41. To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
42. Press the ESC key several times to display the basic setting menu.
43. Press the [End] soft key.
A dialog box appears for you to select whether to save the settings.
44. To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
2.3 Configuring of the Ethernet Interface