Yokogawa Data Acquisition with PID Control CX2000 - Manual (Page 226)

7-34
IM 04L31A01-17E
Input Status of DIO Operation Monitoring
DI01–6 (1 byte)
bit0:
Input status of DIO operation monitoring 1 (0: OFF, 1: ON).
bit1: Input status of DIO operation monitoring 2 (0: OFF, 1: ON).
:
bit5:
Input status of DIO operation monitoring 6 (0: OFF, 1: ON).
bit6–bit7: 0
Shows the input status of DIO operation monitoring for each DIO operation monitoring
number. Assigns the input status of DIO operation monitoring to bits 0 through 5 from
the smallest DIO monitoring number to the largest for other bytes as well. The output
status for DIO types not set to DI is indefinite whether or not DIO operation monitoring
is active.
Output status of DIO operation monitoring
DI01–6 (1 byte)
bit0:
Output status of DIO operation monitoring 1 (0: OFF, 1: ON).
bit1: Output status of DIO operation monitoring 2 (0: OFF, 1: ON).
:
bit5:
Output status of DIO operation monitoring 6 (0: OFF, 1: ON).
bit6–bit7: 0
Shows the output status of DIO operation monitoring for each DIO operation
monitoring number. Assigns the output status of DIO operation monitoring to bits 0
through 5 from the smallest DIO monitoring number to the largest for other bytes as
well. The output status for DIO types not set to DO is indefinite whether or not DIO
operation monitoring is active.
7.3 Output Format of BINARY Data