Yokogawa Data Acquisition with PID Control CX2000 User Manual
Page 51
2-21
IM 04L31A01-17E
Ethernet Interface
2
• Setting the application time out
22.
Use the arrow keys to move the cursor to the [Time] box.
23.
Press the [Input] soft key. An entry box appears.
24.
Enter the application time out time in the entry box.
25.
Press the DISP/ENTER key. On the CX1000, select [ENT] and then press the
DISP/ENTER key. The application time out time that you entered appears in the
[Time] box.
Enabling/Disabling Keep Alive (On/Off)
26.
Use the arrow keys to move the cursor to the [On/Off] box under Keep alive.
27.
Press the [On] or [Off] soft key.
Confirming or Canceling the Settings
28.
To confirm the new settings, press the DISP/ENTER key. To cancel the
settings, press the ESC key.
For a detailed procedure in confirming or canceling settings, see “Setup Procedure Using
Operation Keys” on page ix.
Saving the Settings
29.
Press the ESC key several times to display the basic setting menu.
30.
Press the [End] soft key. A dialog box appears for you to select whether to save
the settings.
31.
To save the settings, select [Yes]. To not save the settings, select [No]. To
return to the basic setting menu, select [Cancel]. Then, press the DISP/ENTER
key.
2.7 Setting the Login and Timeout Functions of Ethernet Communications